Maxflo Low Pressure 6001 Regulator

The Maxiflo Low Pressure Regulator is suitable for all mains, pump and tank pressures above 30cm.

• The METH6001 Regulator suits all lubing cups and nipples
• 1/2 inch BSP inlet (white side) with 3/4 inch BSP outlet (brass side)
• Matches standard BSP fittings.
• Designed for one step reduction of water pressure
• Effectively reduces water wastage and assists supression of water hammer
• Regulator can cope with a wide range of inlet pressure fluctuations
• Large diaphragm area gives the MAXIFLO a particularly sensitive characteristic, essential in many installations where fine control of outlet pressure is required
• Multiple installations of the MAXIFLO pressure regulator in parallel gives increased secondary flow 
• Regulator only with no fittings

Suits

• Poultry Watering Systems
• Animal Water Systems
• Irrigation Systems

This Low Pressure Regulator allows all nipple systems to be used, with the potential of up to several hundred nipples or cups on lubing pipe. Remember water lines must be level and as straight as possible. Maxflo pressure regulators allow mains water input, with adjustable 150mm to 1 metre head output. Suits Lubing 4007, 4009, 4025 poultry drinkers. This water pressure regulator assumes mains pressure not fire fighting pressure, so its good to know what water pressure you have on site. 

For some further reading on water pressure please see our poultry drinkers and water pressure document.

** Note new model is now Black/Black - not Black/White.