There is a wide variety of choices when it comes to chicken drinker systems, pressure, freight and fittings decide a lot of these choices. The Chicken drinker nipples are a low pressure device, keep the top of any water vessel only 30cm above the nipple. 

• The 4050-00 nipple is best installed into a Lubing pipe which is square, this means a flush finish
• The 4050-00 is a 360 degree access nipple, with newer feather touch with less drippage and more surface area per drop, this means the harder the nipple is 'bitten' the more water flows
• The 4050-00 nipple is suitable for quail and chicks and chooks
• A larger nipple and well engineered nipple means bigger drops are easier to peck off and quicker watering of birds with less drippage and waste.
• Type F fitting which means water is available from verticle (up/down) movement of the nipple or side to side movement.

Rigid Breather Unit for Square Lubing Pipe. Suitable for chicken, duck and turkey drinkers lines. Allows you to see the water level and acts as a breather for the system.

• Glue in part - prepare plastics properly first, then glue in to Square Lubing Pipe with PVC glue.
• Water release by unscrewing bung.
• Allows a manual flush to be made to keep water in the pipes cooler, and for cleaning as well.
• Can use this breather to screw in a pressure regulator as well.

Black connector Expansion Drinker Line Joiner - Lubing part number 4363-05.

• For use with Square Lubing pipe.
• Joins 22mm x 22mm Lubing pipe together.
• Tightening Clamps included (not assembled).